Cylinder Stud & Nut Kit Premium

Corsa Factory Parts
Product Code: 210433599

Alternative Product Codes: 433599, PM993, 434078

£26.95

Upgraded Cylinder Stud & Nut Kit.

We have manufactured these kits as the original studs are no longer available from Piaggio. These have been extended by 4mm giving an overall length of 140mm so when fitting the aftermarket 172cc kits such as the Malossi and PM Tuning Pro Street Kits the nuts sit fully onto the studs as the cylinders are slightly taller.

The studs are made from a high tensile alloy steel with excellent corrosion resistant properties so they will not rust like the originals do!

These are machined down on the neck of the stud to approx 7mm giving enough clearance when fitting the cylinder to the engine, beware of other studs on the market simply use M8 bar and put a thread on the end which makes the cylinder tight when fitting, this is wrong!

Comes with 4 x studs (433599) and 4 x Marine Grade Stainless A2-70 Nuts (434078)

NOTE > We would always recommend when fitting new studs to clean the crankcase thread using an M8x1.25 tap with lubricant and then clean the hole with brake cleaner along with compressed air. Always apply loctite thread lock to the stud when fitting.

Another quality part from the “Corsa Factory Parts” range.

In stock

Parts Diagrams

Crankcase

Engine » Dragster 125/180

Crankcase

No: 2

You may also need...

Cylinder Stud Longer 160mm

Cylinder Stud Longer 160mm

Original price was: £5.00.Current price is: £3.00.

In stock